Fast And Safe Logistics
Get samples for free
A 50-ton truck crane is a type of mobile crane that uses hydraulic power to lift and move heavy loads. The crane is mounted on a truck chassis and can be driven to different job sites.
A “50 ton” capacity refers to the maximum weight the crane can lift at its maximum reach. Usually around 100 feet or more. This means the crane can lift loads up to 50 tons at a distance from the crane’s center of rotation.
Hydraulic truck cranes are multipurpose machines. They can be used for a variety of tasks, including construction, mining, and material handling. They are equipped with a jib, which is the long arm that protrudes from the crane. And various attachments such as hooks, buckets and pallet forks. Enable the crane to handle different types of loads.
Operating a hydraulic truck crane requires specialized training and certification, as the machine can be dangerous if not used properly. Safety measures such as outriggers and stabilizers are used to ensure the stability of the crane while in operation
Q:What is the maximum reach of a 50-ton truck crane?
A:The maximum reach of a 50 ton truck crane varies by specific model. But it is usually around 100 feet or more.
Q:How much does a 50-ton hydraulic truck crane weigh?
A:The weight of a 50 ton truck crane can vary depending on the exact model and configuration. But it can range from 80,000 lbs to 100,000 lbs.
Q:How long does it take to set up a 50-ton hydraulic truck crane?
A:The time it takes to set up a 50-ton truck crane can vary depending on the specific model and the conditions of the job site. It can take anywhere from a few minutes to several hours to set up the crane, depending on factors such as the terrain, the weather, and the complexity of the job.
Q:What types of loads can a 50-ton truck crane lift?
A:A 50-ton truck crane can lift a wide variety of loads, including construction materials, heavy equipment, and vehicles. The crane can be equipped with various attachments, such as hooks, buckets, and pallet forks, to handle different types of loads.
Q:What type of training is required to operate a 50-ton truck crane?
A:Operating a 50-ton truck crane requires specialized training and certification. Operators must be trained in the safe operation of the crane, as well as in the proper use of rigging equipment and safety procedures. Training programs typically include both classroom instruction and hands-on practice.
Category |
Item |
Unit |
Parameter |
|
Outline dimension parameters |
Overall length |
mm |
15450 |
|
Overall width |
mm |
2550 |
||
Overall height |
mm |
3900 |
||
Axle base |
mm |
1800+4300+1350 |
||
Tyre tread(front/rear) |
mm |
2015/1860 |
||
Curb weight |
Overall crane |
kg |
43000 |
|
FrontⅠ、Ⅱaxle weight |
kg |
17000 |
||
III/IV axle weight
|
kg |
26000 |
||
Power Parameters |
Engine rates power |
Kw/(r/min) |
248/2300 |
|
Engine rated torque |
N.m(r/min) |
1250/1200~1800 |
||
Travel Parameters |
Max.travel speed |
Km/h |
110 |
|
Min.turning diameter |
m |
24 |
||
Turning radius at swing table tail
|
m |
4.1 |
||
Min.ground clearance |
mm |
230 |
||
Approach angle |
° |
16 |
||
Departure angle |
° |
15 |
||
Max.gradeability |
% |
35 |
Category |
Item |
Unit |
Parameter |
||
Main operation parameters |
Max.total rated lifting load |
t |
50 |
||
Rated working radius |
m |
3 |
|||
Max.load moment | Base boom |
KN.m |
1976 |
||
Fully extend boom |
KN.m |
1147 |
|||
Outrigger span | Longitudinal
|
m |
9.265 |
||
Lateral |
m |
7.8 |
|||
Lifting height | Base boom |
m |
11.6 |
||
Fully extend boom |
m |
42.5 |
|||
Fully extend boom+Jib |
m |
62 |
|||
Boom length | Base boom |
m |
11.3 |
||
Fully extend boom |
m |
42.5 |
|||
Jib |
m |
10/18.5 |
|||
Working speed parameters |
Elevating time | Boom raising time |
s |
37 |
|
Boom descending time |
s |
96 |
|||
Telescoping time | Boom fully extend |
s |
86 |
||
Boom fully retracted |
s |
102 |
|||
Max.swing speed |
r/min |
2.5 |
|||
Outrigger telescoping time | Swing outrigger | Extending synchronously |
s |
22 |
|
Retracting synchronously
|
s |
17 |
|||
Vertical outrigger | Extending synchronously |
s |
33 |
||
Retracting synchronously |
s |
21 |
|||
Lifting speed single rope (wire rope on the fourth floor ) | Main winch | Lifting |
m/min |
120 |
|
Descending |
m/min |
80 |
|||
Auxiliary winch | Lifting |
m/min |
110 |
||
Descending |
m/min |
70 |
If you are interested in any of our products or would like to discuss a customized order, Please feel free to contact us.
Contact Us